Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BFD 3SAP-19N000-U01-LA2-C_ _ _ _ _
Ultrasonic sensors
3
Overview of IO-Link Data and Functions (continued)
Event Code
Event Type
0x8D0E
Notification
(36110)
0x8D10
Warning
(36112)
0x8D15
Warning
(36117)
0x8D20
Warning
(36128)
0x8D22
Warning
(36130)
0x8D23
Error
(36131)
0x8D24
Warning
(36132)
0x8D25
Error
(36133)
0x8D26
Warning
(36134)
0x8DC0
Notification
(36288)
Tab. 3-4:
Events – Overview
www.balluff.com
Event – Description – Remedy
The time has elapsed. This event reports the timeout
of the minimum value/maximum value/average
calculation.
It does not report a timeout for the calculation of the
moving average because the timer repeats and it
does not indicate the end of the calculation.
Device Temperature Upper Warning – The set upper
temperature warning threshold has been exceeded.
Overload at pin 2
► Check wiring.
Device Temperature Lower Warning – The device
temperature has fallen below the set lower
temperature warning threshold.
Warning limit for write cycles reached – maintenance
monitoring no longer guaranteed – for information
purposes only.
Write cycle limit reached – saving no longer ensured
– replacement recommended.
Parameter write error – for information purposes
only.
Parameters not consistent – basic settings are used,
service required. Parameterization processes and
resets can no longer be performed.
User data was reset to the default settings.
► Check settings and acknowledge warning.
Teach-in Timeout – The current teach-in process
took too long and was interrupted.
Device Status
0 – Device is operating properly.
0 – Device is operating properly.
2 – Out-of-Specification
0 – Device is operating properly.
0 – Device is operating properly.
1 – Maintenance-Required
0 – Device is operating properly.
4 – Failure
1 - Maintenance required
0 – Device is operating properly.
english
23
Werbung
