Ultrasport 330300000004 Bedienungsanleitung Seite 27

NOTE
• Set up the device on a rm and even surface with a non-slip protective cover for your
oor/carpet. Ensure that the device maintains a safety clearance of 2x2 meters from other
objects and walls.
• NB: The hooks on the stepper must not be subjected to lateral loads as they are exclusively
designed for upwards tensile loads.
• The step intensity can be changed by turning the locking screw.
• The distance between the pedals must not exceed 9cm as otherwise the steps will not be
counted.
• Please note that steps cannot be counted if the tread height is too low.
• During training, the tips of your feet must touch the front edge, if you stand too far back. The
device will tilt backwards (danger of accident).
GB
6. The distance between the ends of the pedals
should now be approx.. 8cm (see Fig.4).
Fig. 4
7. Use the snap hooks to secure the two ropes to
the designated eyelets on the stepper (see Fig.5).
Fig. 5
www.ultrasport.net