Display Settings; Setting The Temperature Unit In Use (C/F); Setting The Setpoint/Actual Value Display (A/S); Setting The Temperature/Humidity Display (T/H) - HomeMatic HM-CC-TC Montageanleitung Und Bedienungsanleitung

9

Display settings

9.1

Setting the temperature unit in use (C/F)

In this menu item, you can switch between a temperature display
in degrees Celsius and degrees Fahrenheit.
• Press and hold down the "Menu" button for four seconds.
• Use the handwheel to select the menu item "C/F".
• Confirm with OK.
• Use the handwheel to select the required temperature unit.
• Confirm your entry using the OK button.
9.2

Setting the setpoint/actual value display (A/S)

You can use this menu item to set whether the actual
temperature value (Actual) or setpoint temperature (Set)
should be shown on the display.
• Press and hold down the "Menu" button for four seconds.
• Use the handwheel to select the menu item "A/S".
• Confirm with OK.
• Use the handwheel to choose between "Actual" (actual tem-
perature value) and "Set" (setpoint temperature).
• Confirm your entry using the OK button.
9.3

Setting the temperature/humidity display (T/H)

You can use this menu item to select whether the temperature
and humidity should be shown alternately on the display, or
whether the temperature should be shown permanently.
• Press and hold down the "Menu" button for four seconds.
• Use the handwheel to select the menu item "T/H".
• Confirm with OK.
54