Settings In Initial State And Resetting (Res); Settings For Automatic Mode (Prg) - HomeMatic HM-CC-TC Montageanleitung Und Bedienungsanleitung

8.1

Settings in initial state and resetting (RES)

In the initial state, default values have already been assigned to
all the required system settings:
• Comfort temperature: 21°C
• Reduction temperature: 17°C
• Temperature phase 1: 17°C from 0:00 to 6:00
• Temperature phase 2: 21°C from 6:00 to 12:00
• Temperature phase 3: 21°C from 12:00 to 23:00
• Temperature phase 4: 17°C from 23:00 to 0:00
• Open-window temperature: 12°C (for all taught-in sensors)
• Routine descaling: Saturday, 11:00
• Alternating temperature and humidity display
• Display backlighting off
• Valve position in the event of a malfunction: 25%
You can change all the settings listed above and adapt them to
suit your individual requirements. You also have the option of
restoring the factory settings at any time using the "Special func-
tions" menu, "RES".
8.2

Settings for automatic mode (PRG)

You can adapt the temperature profile to suit the individual
requirements of your room. For this purpose, you can change the
times at which automatic temperature phase switchover occurs
for each day of the week separately. This means you can adjust
the system to work in line with your usual routines.
When you are making settings for the individual phases, the start
time for the temperature phase concerned is always displayed at
the top left-hand side. The start time is determined automatically
based on the end time of the previous temperature phase.
49