HomeMatic HM-CC-TC Montageanleitung Und Bedienungsanleitung Seite 38

• Day of the week
• Time setting - hours
• Time setting - minutes
Once you have done this, the date and time will be set. The
system will now switch back to the default display.
If the wall thermostat has been taught-in to a central
control unit, the controller will request the date and time
from the central control unit the next time the batteries
are replaced. If this is successful, you will be taken to the
default display immediately.
Changing the date and time
• Open the configuration menu by pressing and holding down
the "Menu" button.
• Use the handwheel to call up the DAT function.
• Now set the date and time as described above.
38