Setting The Date And Time (Dat) - HomeMatic HM-CC-TC Montageanleitung Und Bedienungsanleitung

If the device is being operated in conjunction with a HomeMatic
central control unit, a service message is sent to the CCU too.
Caution! There is a risk of explosion if the battery is not replaced
correctly.
6.2

Setting the date and time (DAT)

Once you have inserted the batteries, a short display test is
performed and then the firmware version number is displayed.
You now need to enter the date and time. Use the handwheel to
do this. Once you have entered the relevant information, confirm
it with the "OK" button. You will then be taken to the next stage
of the process. Whilst you are working through the process of
entering the date and time, you can go back to the previous step
at any time using the "Menu" button.
• Calendar year
• Calendar month
Used batteries should not be disposed of with
regular domestic waste! Instead, take them to
your local battery disposal point.
37