HomeMatic HM-CC-TC Montageanleitung Und Bedienungsanleitung Seite 50

You can define up to 24 time phases for each day.
• Press and hold the "Menu" button to open the configuration
menu.
• Select the menu item "PRG" and press the OK button to make
settings in the time program.
Selecting days for changes to be made:
• Use the handwheel to select the day or days for which you
wish to make changes to the time program. You can select
the following: individual days (Mon-Sun), working week days
(Mon-Fri), or the weekend (Sat-Sun).
• Confirm your entry with OK.
Selecting time phases:
The display shows the first time phase. The top line shows the
start time, which cannot be changed, and the bottom line shows
the time for the end of the first temperature phase, which can be
changed.
• Use the handwheel to set the end time for the first temperature
phase.
• Confirm using the OK button. The setpoint temperature for the
selected time range appears on the display.
50