System Info; Device Info (Info); Setup And Installation - Cameo OPUS SP5 Bedienungsanleitung

System Info

Error infor- Functional error display
mation If it is not possible to eliminate a functional error by resetting or restarting, the faulty unit must be repaired by an
authorized service center.
Temperature Temperature display
Runtime Displays operating hours
Firmware Displays the firmware of
components 1U to 8U
Model Info Device version information

SETUP AND INSTALLATION

Thanks to the integrated rubber feet, the spotlight can be placed in a suitable location on a flat and solid surface. Install on a truss using
two omega brackets that are attached to the bottom side of the unit (A). Two omega brackets are included in delivery, suitable truss clamps
are optionally available. Make sure that the spotlight is firmly attached and secure it using a suitable safety cable on one of the designated
locations (B).
Important info: Overhead installation requires extensive experience, which includes calculating the limit values of the
working load of the installation material to be used and regular safety inspections of all installation material and spotlights. If
you do not have these qualifications, do not attempt to carry out the installation yourself; contact a professional company.
Head xx°C/F°
Base xx°C/F°
Unit Displays the temperature in Celsius or Fahrenheit
Total Time Displays the total operating time in hours
Current Time Displays the current operating time
Time PW Inputs the password to reset the current operating time
(Time PW = 050)
Clean Current Resets the current operating time
Vx.x.x
ProfileModule Module with framing shutter
SpotModule Module with animation wheel
B
B
A
A
13