Dimmer Curves; System Info - Cameo F4 FC Bedienungsanleitung

Fan
Factory Reset
UC/Loops Reset

DIMMER CURVES

linear
DMX value
SYSTEM INFORMATION (System Info)
Starting from the main display, press on the right push button rotary encoder to move to the main menu. Rotate the left encoder (SELECT)
to select "System Info" menu item (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). Rotate the left
encoder to display the desired information (see chart).

System Info

Main CPU Device firmware
LED Temp. Displays the LED temperature in Celsius or Fahrenheit
Op. Hours Cumulative operating time in hours and minutes
Display Activates/deactivates display
DMX Fail Operating mode if DMX signal is lost
Dim Curve Dimmer Curve
Dim Response Dimmer behavior
Red Shift Activates/deactivates colour drift
PWM LED PWM frequency
Calibr. Factory default calibration / no adjustment / user defined adjustment
Colour-Cal. R Adjusts red (independent of mode)
Colour-Cal. G Adjusts green (independent of mode)
Colour-Cal. B Adjusts blue (independent of mode)
Color-Cal. W Adjusts white (independent of mode)
Autolock Activates/deactivates automatic locking of the control element
Fan Fan settings
MANUAL LOCK FUNCTION
While the option is available to have the spotlight lock itself automatically against unintentional or unauthorized use (see "Settings" - "Au-
tolock"), it is also possible to lock the controls manually. Press the center and right push button rotary encoders simultaneously for approx.
3 seconds. Any subsequent attempt to change the controls will display "Locked!" on the display and no further changes to the spotlight
settings can be made via the encoders. After approx. 1 minute the name of the currently set mode then returns. To unlock the controls, press
the center and right push button rotary encoders simultaneously for approx. 3 seconds. The display then returns to whichever information it
had been showing before the lock was applied.
14
= Fan setting
Restore factory settings
= (without resetting user
colours and loops)
Reset the user colours
= and loops to factory
settings
exponential logarithmic
DMX value
DMX value
Constantly low fan speed with reduced brightness,
Constant Low
if necessary
Constant average fan speed with reduced bright-
Constant Medium
ness, if necessary
Constant High Constant high fan speed
Reset to factory settings:
Reset Now?
confirm with ENTER, cancel with ESC
Reset User Colors/ Reset to factory settings:
Loops confirm with ENTER, cancel with ESC
S-curve
DMX value