Changing The Username/Password And Logging In To The System; Changing The Password During Initial Setup And Logging In To The System - Sygonix 2523277 Bedienungsanleitung

12.2.2 Third page - time and language settings
Select your time zone at the top of the third page under "Time Zone" by clicking on the small arrow on the right
and then on the desired time zone.
Regardless of the time zone adjustment, the date and time should already be correct if you have an active internet
connection.
To change the data, click on the number you want to change and then select the correct number with the mouse.
Click on the hours to change them; for hour 9, for example, first click on "0" and then on "9".
For changes to apply, click on a grey area beyond the number field.
Next, set the desired date display format under "Date Format".
In the menu "Date Separator" below select a date separator.
Select a 12- or 24-hour format under "Time Format".
Finally, set the desired language in the menu "Language".
Click on "Next" to save the settings.
Confirm with "OK" and wait until the reboot is complete.
To disable the wizard, enable the corresponding checkbox after the reboot to disable the wizard and then click on
the right button to cancel the wizard.

12.3 Changing the username/password and logging in to the system

Basically, you must enter a username and password to log in to the system. Otherwise you will not be able to change
any settings. If you are not yet logged in to the system (e.g. after switching on), click on the right mouse button and
then on the topmost menu item to display the login window.
The system comes with an automatically generated username and password. Unless the password has been
changed, it is displayed in plain text.
The password and username should be changed during the initial setup.
Æ

12.3.1 Changing the password during initial setup and logging in to the system

To open the login window, click on the right mouse button and select the topmost item in the menu that appears.
If you are not yet logged in to the system, a pop-up login window appears. The username and password are dis-
played in plain text. Click on the blue lettering next to the password to change the password during the initial setup.
Click in the password field and select a password by clicking on the letters and numbers.
The password must contain at least 6 alphanumeric characters.
We recommend using a password that has at least 8 characters and contains uppercase and lowercase letters,
numbers and special characters.
Click on the button below to continue.
Now you need to select two security questions and enter the corresponding answers. They are required if you
have forgotten your password and it needs to be reset.
You can also opt to have the password sent to the app or an e-mail address.
Click on "OK" at the bottom and confirm again with "OK" to have your password changed.
The login window will now appear automatically. Normally, your user data will be applied automatically.
Important!
Only leave the Remember Password box checked if no one else can access the system. Otherwise, an unau-
thorised user will be able to log in to the system via your account.
It you forget your password later, click on the corresponding lettering.
Now click on the button at the bottom left to log in.
59