Other Settings; Formatting The Hard Disk/Ssd And Memory Card - Sygonix 2523277 Bedienungsanleitung

12.3.4 Other settings

This settings menu is used to manage, create and delete all users and groups:
In addition, you can create a login template for each user (as with a smartphone).
Select the desired user.
Click on the tenth button on the right.
Move the cursor to the desired first item, press and hold the left mouse button and then slowly drag the cursor
from one item to another until the desired template is ready. Release the mouse button to apply the template.
Finally, you must confirm the template again.
After releasing the mouse button, the matched template will be applied and saved.
Confirm with "OK".
If you wish to quit or restart while creating the template, you can simply close the active window with a right
mouse click.

12.4 Formatting the hard disk/SSD and memory card

Normally, a newly connected storage device is formatted automatically or you will be prompted to format it.
If you want to reformat a storage device or if something has gone wrong during formatting, proceed as follows.
Click on the right mouse button and select the topmost item in the menu that appears to switch to the main menu.
Then click on the button with the wrench symbol at the bottom left.
Now click on the third button from the right in the top row with the folder symbol. The memory management menu
will now appear.
To format a storage medium, click on the desired storage medium at the top of the list to highlight it. Then click on
the upper left button at the bottom to start the formatting. Finally, confirm with "OK".
This menu also enables you to configure various other functions, such as changing read and write permissions for
the partitions, partitioning a storage medium, etc.
Click on the right mouse button to exit the menu.
Click on the right mouse button again to exit the configuration menu.
61