Technical Data; Maintenance And Cleaning - Sygonix 751728 Bedienungsanleitung

Connection
Please consult the operating instructions for the devices that are to
be used with this product (e.g. surveillance camera, monitor, etc.)
without fail.
• Make sure that the video splitter is not powered up.
• Connect a camera to the "VIDEO IN" port.
• Make sure that the connected camera is supplied with power.
• Connect the display devices to the "VIDEO OUT" ports.
• Connect the low-voltage adapter on the enclosed wall plug transformer
to the "DC IN" port (alternatively, a 24 V/AC alternating voltage can also be
connected to the "AC24V IN" terminals to supply the power).
Start-up
• Make sure that either the wall plug transformer (12 V/DC) is connected to
the video splitter, or that the "AC24V IN" is supplied with a 24 V/AC alter-
nating voltage.
• Plug the wall plug transformer into a standard domestic mains socket
230 V/AC, 50 Hz.
• Turn your display device on and set the desired channel, if necessary.
The "POWER" status LED lights up red, as soon as the video splitter
is supplied with an operating voltage.

Maintenance and Cleaning

To clean the outside of the devices, a dry, soft and clean cloth is sufficient.
If it is very dirty, the cloth can be moistened slightly.
Clean the housing very carefully, otherwise you may scratch it. Do not use
any aggressive cleaning agents.
Disposal
Electrical and electronic products do not belong in the household
waste!
Please dispose of the device, when it is no longer of use, according
to the current statutory requirements.

Technical Data

Video Splitter
Operating voltage ...................... 12 V/DC (via wall plug transformer) or 24 V/AC
Video input ................................. Connection = 1 x BNC (75 ohms, 0.8 - 1.2 Vpp
Video output .............................. Connection = 4 x BNC (75 ohms, 1 Vpp)
Video bandwidth ....................... 10 Hz to 10 MHz
Transmission range ................... up to 150 m
Weight ......................................... approx. 117 g
Dimensions ................................. approx. 138 x 86 x 32 mm
Operating temperature ............. 0 °C to +55 °C
Storage temperature range ..... -20 °C to +80 °C
Wall plug transformer
Input voltage .............................. 230 V/AC, 50 Hz
Output voltage ........................... 12 V/DC, 500 mA
Legal notice
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the
capture in electronic data processing systems require the prior written approval by the editor. Reprinting,
also in part, is prohibited. This publication represent the technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
(terminal is available)