Advanced Camera Configuration; Advanced Camera Settings; Configuring The Recording Function - Sygonix 2523277 Bedienungsanleitung

13.3 Advanced camera configuration

Open the camera configuration menu.
Click on the left button under the camera list to initiate the cable configuration.
13.3.1 Changing the wireless camera connection
If a camera is currently connected wirelessly and you want to connect it to your network via LAN, proceed as follows:
Connect the camera to the network.
Click on the first button at the top right to start the camera search.
You should see the camera that is wirelessly connected in the bottom list. The top list should include the same
camera with the same IP address and the camera with an IP address from your network.
Now remove the camera from the bottom list.
To do so, click on the red "X" near the camera or check the checkbox in front of the camera and then click on the
button at the top right of the bottom list to remove the camera.
Now add the camera from the top list with an IP address from your network.
To do so, click on the "+" near the camera or check the checkbox in front of the camera and then click on the
second button to the right of the top list to add the camera.
The camera will appear in the bottom list in the next free position.

13.3.2 Advanced camera settings

This configuration page contains advanced camera settings:
Clicking on the blue button with the magnifying glass symbol beside a camera in the bottom list opens the diag-
nostics page. This page can also be accessed from the menu (right mouse button) via the penultimate menu item
(globe symbol) under the network information.
Clicking on the blue button with the cogwheel symbol beside a camera in the bottom list opens the camera
configuration page. This page can also be accessed from the menu (right mouse button) via the sixth menu item
(camera symbol with a cogwheel).

13.4 Configuring the recording function

Click on the right mouse button and select the topmost item in the menu that appears to switch to the main menu.
Now click on the third button from the right with the camera symbol (blue). The configuration page for the recording
function will open.
By default, the recording is set to 24 hours. You can additionally set the recording in the event of detection or alarm.
The following configuration options are also available:
If you want to record on the SD card, check the checkbox at the top.
Select the desired camera channel from the drop-down menu.
Enter the length of the videos in minutes.
Select the recording mode. Scheduled recording is set by default. You can also choose manual recording or
disable the recording function.
You can set the desired weekdays on which the camera should record.
You can also set the schedule. To do this, the scheduled recording option must be selected. You should also select
whether the recording should take place continuously and/or in the event of detection and/or alarm.
Clicking on the button at the bottom left takes you to an extended menu where you can copy the current setting
and paste it into the next channel.
Click on "OK" to save changes.
66