Maintenance Information - Checchi & Magli SP 140 Bedienungs- Und Wartungsanleitung

Safety advice for maintenance
Maintenance work must be carried out with the work
vehicle on flat, compact ground, with the tractor en-
gine off, parking brake engaged, and ignition key re-
moved, and adopting all the necessary safety meas-
ures required to work safely.
Any maintenance operations that can be carried out
on the business premises come under the ordinary
maintenance envisaged in the instruction manual.
Maintenance interval schedule
To guarantee constant, efficient and safe machine op-
eration, ensure all the maintenance envisaged by the
Interval Component
Ploughshare
Cutting discs
Rod conveyor
Every hour
Crop conveyors
Rod conveyor rollers
Support wheels
Every day Driveshaft
Transmission chain
Every 50 hours
Nuts and bolts
Every 100 hours Gear box
Every 2000 hours Gear box
Tyre check
Check the tyres for wear and if they feature tears or signs
of ageing, they must be replaced.
English language

MAINTENANCE INFORMATION

Special maintenance operations (non included in
this handbook) require a specialised workshop on
the premises which meets the requirements speci-
fied by the relative laws in force (appropriate equip-
ment suitably trained staff etc.); if you do not have a
compliant workshop, contact an authorised one.
manufacturer is carried out.
Maintenance intervals
Type of work
Cleaning
Greasing
Lubrication
Check of nuts and bolts
tightening torque
Oil level check
Oil change
Check and if necessary restore the tyre pressure (see the
"Technical characteristics" table).
21
Manual reference
See "Lubrication diagram"
See "Lubrication diagram"
See "Checking nut and bolt
tightness"
See "Checking the gear box oil
level"
See "Replacing the gear box oil"
Use and maintenance
7