|
Connecting Atlan to the Ambia ceiling supply unit
7. Tighten the M6x30 hexagon socket screw (12) by hand. Then loosen it again
with 1/2 turn.
8. Hand-tighten the M10x65 hexagon socket screw (10).
4.3
Coupling to the Ambia ceiling supply unit
The following describes the exact alignment of the standard rail for the Ambia
ceiling supply unit. The exact procedure for coupling the Atlan ceiling-mounted
versions to the ceiling supply unit is described in the supplement "Atlan A300, A350
ceiling-mounted versions and wall-mounted version".
32
|
Kit
Atlan A3xx SW 2.0n ceiling-mounted versions