Inhaltsverzeichnis
Werbung
3. Tighten the two M10x65 hexagon socket screws (1).
Tightening torque: 30 Nm
5
Connecting Atlan to the Movita ceiling supply
unit
5.1
Safety instructions
Docking, undocking, and moving the device
Incorrect docking or undocking can result in the device falling down. If the
instructions on tipping stability are not observed or the unit is moved on the service
cart, the device may tip.
The responsible personnel must be trained and appropriately instructed in handling
the device. Otherwise there is a risk of personal injury or property damage.
► The device may only be docked, undocked, and moved by appropriately trained
personnel.
In the event of unintentional contact between the device and the kit, the kit may
become displaced or detached.
► Check the position and the attached parts of the kit.
Unintentional movement of the ceiling supply unit or the service cart
Unintentional movement of the ceiling supply unit or incorrect handling of the ceiling
supply unit and the service cart may trap persons or objects and, in the case of
persons, cause crushing injuries. Personal injury or property damage may result as
a consequence.
► Take particular care when moving a device which is coupled to the ceiling supply
unit.
► Pay attention to the following:
– When coupling and uncoupling, hands must not be in the area between the
– When positioning the service cart, hands must not be in the area between the
|
Kit
Atlan A3xx SW 2.0n ceiling-mounted versions
device and the ceiling supply unit.
device and the service cart.
Connecting Atlan to the Movita ceiling supply unit
|
37
Werbung
Inhaltsverzeichnis
