Uncoupling The Ceiling-Mounted Versions - Dräger Atlan A3-Serie Bedienungsanleitung

|
Connecting Atlan to the Movita ceiling supply unit
5.4.1

Uncoupling the ceiling-mounted versions

5.4.1.1 Ceiling-mounted version with service cart
1. Unscrew the four M6x35 hexagon socket screws (1) on the clamping bar.
2. Move the clamping bar upwards at a distance of at least 100 mm from the upper
edge of the device mount.
3. Tighten the four M6x35 hexagon socket screws (1).
Tightening torque: 10 Nm
5.4.1.2 Ceiling-mounted version with integrated castors
1. Unscrew the four M6x35 hexagon socket screws (1) on the clamping bar.
2. Move the clamping bar upwards at a distance of at least 100 mm from the upper
edge of the device mount.
3. Tighten the four M6x35 hexagon socket screws (1).
Tightening torque: 10 Nm
42
|
Kit
Atlan A3xx SW 2.0n ceiling-mounted versions