Inhaltsverzeichnis
Werbung
2. Attach the standard rail (3) together with the frame rail clamp (4) to the frame rail
(6) of the media column (7) at least 100 mm above the device mount (5).
3. Hand-tighten the M10x65 hexagon socket screw (8).
4. Loosen the second M10x65 hexagon socket screw (10) until the frame rail
clamp fits over the frame rail on the media column.
5. Place the second frame rail clamp (9) above the standard rail on the frame rail of
the media column and move it.
6. Connect the frame rail clamp (9) to the standard rail.
Ensure that the shim (11) is located in the standard rail at the corresponding
fastening openings. The shim must be mounted with the standard rail on the
frame rail clamp.
Remove the cap (14) to align the shim.
|
Kit
Atlan A3xx SW 2.0n ceiling-mounted versions
Connecting Atlan to the Ambia ceiling supply unit
|
31
Werbung
Inhaltsverzeichnis
