Mounting The Clamping Bar On The Movita Ceiling Supply Unit; Preparing The Clamping Bar; Mounting The Clamping Bar - Dräger Atlan A3-Serie Bedienungsanleitung

|
Connecting Atlan to the Movita ceiling supply unit
5.2 Mounting the clamping bar on the Movita ceiling supply
unit
5.2.1

Preparing the clamping bar

1. Attach the two product labels (2) to the corresponding positions of the clamping
pieces (1) as shown in the diagram.
2. Loosen the four M6x35 screws (3) until the clamping pieces fit over the frame
rail of Movita.
5.2.2

Mounting the clamping bar

1. Position the clamping bar (1) at least 100 mm above the device mount (3) on the
frame rail of the media column.
38
|
Kit
Atlan A3xx SW 2.0n ceiling-mounted versions