Inhaltsverzeichnis
Werbung
|
Connecting Atlan to the Movita ceiling supply unit
5.3.1.2
Laying the cable
1. Insert the 85 mm standard rail for the channel (3) into the vertical profile rail of
the device. Bring it to the appropriate height (see illustration) and screw it tight.
Tightening torque: 9 Nm ±10 %
2. Route the corresponding cables around the standard rail. Secure them with a
cable tie (4).
5.3.2
Coupling the ceiling-mounted versions
5.3.2.1
Ceiling-mounted version with service cart
1. Connect Atlan to the ceiling supply unit.
2. Unscrew the four M6x35 hexagon socket screws (1) on the clamping bar.
3. Move the clamping bar at a distance of 16 mm from the upper edge of the device
mount.
40
|
Kit
Atlan A3xx SW 2.0n ceiling-mounted versions
Werbung
Inhaltsverzeichnis
