Preparation; Mounting On Stand; Connecting To Mains Power Supply - Dräger Photo-Therapy 4000 Gebrauchsanweisung

Preparation

Preparation

Mounting on stand

Mount the phototherapy lamp in the arms on the stand by the
handles:
1 Insert into the front oval notches first
then slide in at an angle and
2 insert into the rear slanted notches.
Check that the unit is firmly in place.

Connecting to mains power supply

3 Mains voltage must correspond with operating voltage
given on the rating plate.
The white switch for the white light and the blue switch for
therapy on the front of the device must be in the »OFF«
position.
4 Connect the mains cable to the phototherapy lamp and
then to the mains.
For 110 to 115 V and 120 to 127 V phototherapy lamps
5 Check the position of the voltage selector switch. Choose
the switch setting according to line voltage supplied, either
110 to 115 V or 120 to 127 V.
20
1
4
110-115 V
120-127 V
Fuse
5
Instructions for Use Photo-Therapy 4000
2
3