Boost Mode; Settings In The Menu Area - Fronius Ohmpilot Bedienungsanleitung

Boost Mode

Boost Mode Boost Mode is used to supply the load at the "Heater 1" output with 100% of the
available power for a short time. Over a maximum period of 4 hours, the dimmer
level is activated at 100%, L2 and L3 are switched through. This may result in
electricity being sourced from the grid.
Boost Mode can be activated and deactivated by pressing the button on the
Ohmpilot (see
Settings in the
menu area
1
2
3
118
Indicators/controls on the device
Open the Ohmpilot user interface
Chapter Establishing the data connection
can access the Ohmpilot user interface.
Activate Boost Mode by clicking on the button of the same name.
Click the button again to deactivate Boost Mode.
) or via the user interface.
on page 113 describes how you