Settings In The Menu Area - Fronius Ohmpilot Bedienungsanleitung

Settings in the
menu area
1
2
3
IMPORTANT!
If the "Circulating pump" option is selected, no other heater can be controlled by
the Ohmpilot. The "HEATER 1" output controls the heating element which, in
combination with the circulating pump, heats a hot water tank.
112
Open the Ohmpilot user interface
Chapter Establishing the data connection
can access the Ohmpilot user interface.
Under HEATER 1, select "Automatic"
Under HEATER 2, select "Circulating pump"
on page 113 describes how you