Connecting Devices - Honeywell Miller HANDZUP Anwendungshinweise

a fall and the potential fall distance.
• Has a minimum strength of 12 kN.
• Is located above the operator.
• Is in the vertical axis of the work plane: (maximum deviation ± 30°).
• Fits suitably with the equipment hanging system.
• Has no sharp edges.

CONNECTING DEVICES

The connecting device (lanyard, self retracting lifeline, etc.) provides the connec-
tion between the harness and the anchorage point and is an essential element for
your safety. We recommend that you check the following:
• When connecting this equipment, ensure karabiner gates are locked correctly
in place.
• Allocate equipment to each individual user whenever possible.
• Check the equipment before each use to ensure in particular that there is no
distortion, no signs of excessive wear and the locking system is working prop-
erly.
• Follow the instructions in the user manual for this connection device .
10 - MEANING OF MARKINGS (CF 162-168)
Appendix 1: List of products in the Miller HandZup® range (CF 169)
Appendix 2 : PPE compatibility
Appendix 3 : EU 2016/425 conformity
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.
15