Operation Via App; General Information - Dräger X-node Technisches Handbuch

en |
Operation and controls
Status visualisation Charging
Measured value < Charging OR bat-
A1 tery < 10 %
The measured value USB inserted:
falls short of alarm - Battery charging
threshold A1. USB not inserted:
- Battery < 10 %
A1 < Measured Battery 10 ... 39 %
value < A2
USB not inserted:
The measured value Battery 10-39 %
falls between the
alarm thresholds A1
and A2.
54
Other Status visualisation Charging
Bluetooth connec- Measured value
tion > A2
The status LED lights The measured value
up blue if a Bluetooth exceeds the alarm
connection has been threshold A2.
established. It will
remain blue until the
status LED is used
for another status dis-
play.
Incompatible sen-
sor
5.4
If the status LED
flashes blue after the 5.4.1
sensor is inserted,
The "Dräger X-node" app is available to download from the Google
this means the sen-
Play Store and the Apple App Store.
sor is not compatible.
The app supports the following operating systems:
– iOS > 12.0
– Android: > 8.0
The user interface is not optimised for tablets.
Fully charged OR
battery > 39 %
USB inserted:
- Battery is fully
charged
USB not inserted:
- Battery > 39 %

Operation via app

General information

Technical manual
Other
Position alarm
If the X-node is tilted
more than 30° for lon-
ger than a minute, a
position alarm will be
triggered. The device
flashes or pulses red
as it does when the
second alarm limit is
exceeded, but per-
manently.
|
Dräger X-node