Description; Product Overview; Function Description; Compatible Sensors - Dräger X-node Technisches Handbuch

3

Description

3.1

Product overview

1
2
3
4
5
1 Mounting lug
2 Status LED
3 Housing for Dräger X-node sensing head
4 DrägerSensor
5 Bayonet ring
6 Micro USB port
Technical manual |
Dräger X-node
6
3.2

Function description

The Dräger X-node is a mobile gas detection instrument used to
continuously monitor gas concentrations and environmental values
(temperature, relative humidity, air pressure). Dräger sensors are
used to configure the X-node for a specific type of gas.
It is possible to save the measured values internally, set an optical
signal for when they exceed limit values and remotely transmit them
to an external application. Bluetooth is used for this within close
proximity, while LoRaWAN is used for longer distances.
Use of the device in potentially explosive environments is not
permitted.
3.3

Compatible sensors

The sensors that are compatible with the X-node are listed below. The
sensor designation refers to the gas that can be measured with the
sensor. Use the part number for the respective sensor when
(re)ordering.
Sensor designation
DrägerSensor CO IR
2
DrägerSensor CO
DrägerSensor H S LC
2
DrägerSensor Cl
2
DrägerSensor H O HC
2 2
DrägerSensor NO LC
2
DrägerSensor NH FL
3
DrägerSensor NH AL
3
DrägerSensor O
3
|
Description
Part number
6800482
6809605
6809610
6809665
6809705
6813205
6813260
6813735
6814005
en
45