Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.4
Setting soft tension
When soft tension is set the tension wheel starts more slowly and the tension force is reduced. This
prevents excessive soiling when PP straps are used.
Press "Soft" button (1).
–
The soft mode is deactivated when the
"SOFT" display (2) changes position and
is shown outlined.
Press "Soft" button (1).
–
The soft mode is activated when the
"SOFT" display (3) changes position and
is shown in bold.
–
The displayed tension force is reduced
correspondingly.
–
On the left under the tension force an "S"
(4) also appears.
4.5
Setting welding time
The set welding time is displayed continuously by means of lled dots when the tool is ready for opera-
tion.
Press the "Welding time" button (2).
–
Unused displays disappear.
–
The lled dots of the currently set welding
time ash for 5 seconds.
–
+ and – appear.
Press the + (1) or – (3) button and hold down
until the desired welding time is displayed.
Save: Press the "Welding time" button (2) or
wait 5 seconds.
4.6
Switch touch-pad lock on and off
The touch pad can be locked to prevent unwanted
changing of the settings.
Locking: Press the "Touch pad lock" button
(1) and hold down while pressing tensioning
button (Section 3.1, item 1) at the same time.
–
The lock symbol (2) changes position and
is shown closed.
Unlocking: Press the "Touch pad lock"
button (1) and hold down while pressing the
tensioning button (Section 3.1, item 1) at the
same time.
–
The lock symbol (3) changes position and
is shown open.
V 02.16
1
2
3
4
SIGNODE BXT3-13/16/19
3
2
ENGLISH
1
1
2
3
39 of 53
Werbung
Inhaltsverzeichnis
