Scope Of Delivery; Proper Use; Safety Instructions; General Safety Instructions For Electrical Devices - Scheppach SD1600V Original Bedienungsanleitung

3. Scope of delivery

• Scroll saw
• Saw blade guard (5) with retaining device (23)
• Blow-off device (1)
• Saw blade (21) for wood and plastics (2x) (1x pre-
mounted)
• Allen key, 3 mm (22)
• Original Operating Manual

4. Proper use

The scroll saw is used for cutting angular timbers or
other materials such as Plexiglas, GRP, foam, rubber,
leather and cork. Never use the saw to cut round mate-
rial. Round material can tilt easily.
Danger of injury! Parts may be ejected!
The device may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or inju-
ries of any type resulting from this.
Please observe that our equipment was not designed
with the intention of use for commercial or industrial
purposes. We assume no guarantee if the equipment
is used in commercial or industrial applications, or for
equivalent work.
• Only suitable saw blades may be used for the ma-
chine.
• An element of the intended use is also the obser-
vance of the safety instructions, as well as the as-
sembly instructions and operating information in the
operating manual.
• Persons who operate and maintain the machine
must be familiar with the manual and must be in-
formed about potential dangers.
• In addition, the applicable accident prevention regu-
lations must be strictly observed.
• Other general occupational health and safety-relat-
ed rules and regulations must be observed.
• The liability of the manufacturer and resulting dam-
ages are excluded in the event of modifications of
the machine.
Residual risks
Even when this electric tool is operated properly,
residual risks still remain. The following hazards
may arise in connection with the design and con-
struction of this electric tool:
26 | GB
• Lung damage if suitable dust protection mask is not
worn.
• Hearing damage if suitable hearing protection is not
worn.
• Risk of accident due to contact with the hands in the
uncovered cutting area of the tool.
• Danger of injury during a tool change (cutting haz-
ard).
• Crushing of fingers.
• Danger due to kick-back.
• Tilting of the workpiece due to insufficient workpiece
support surface.
• Touching the cutting tool.
• Ejection of branches and workpiece parts.

5. Safety instructions

5.1 General safety instructions for electrical de-
vices
m WARNING
The following basic safety measures must be observed
when using electric tools for protection against electric
shock, and the risk of injury and fire.
Read all these notices before using the electric tool and
store the safety instructions well for later reference.
Maintenance and service
1. Regular cleaning, maintenance, and lubrication.
Pull out the mains plug before making any settings,
service or repair work.
2. Only have your device repaired by qualified spe-
cialists and only with original spare parts.
This ensures that safety of the device is maintained.
Safe work
1. Keep the work area orderly
- Disorder in the work area can lead to accidents.
2. Take environmental influences into account
- Do not expose electric tools to rain.
- Do not use electric tools in a damp or wet envi-
ronment.
- Make sure that the work area is well-illuminated.
- Do not use electric tools where there is a risk of
fire or explosion.
www.scheppach.com