Analogue Output Interface Vf I/O For Spindle Speed Control - Optimum OPTiturn TH4610D Betriebsanleitung

PIN No.
TTL differential sig-
nal for ML glass
scales and active
read head for mag-
netic strips
Spherical grid signal
for spherical scales
Note (selection signal +): The DPA32 can automatically identify the signal types based on this
selection signal.
7.2.2

Analogue output interface VF I/O for spindle speed control

The sensor for speed measurement from the scope of delivery of the electronic display must be
connected for this. Power is supplied via the rear jack plug.
Jack plug
VF I/O connection
Pin No. 1
Signal 10V
When the CSS function is started, the digital indicator outputs an analogue 0-10 V signal to
control the spindle speed.
When the CSS function is off, the potentiometer signal controls the spindle speed.
EN
DPA32 CSS
194
1 2 3
not in Selection signal
Z+
use +
+12V E+ not in use
2 3 4
A_In GND 10V
Translation of original instruction
4 5 6 7
B+ B- 0V +5V A+
not in not in
E- S 0V
use use
VF I/O
1
2
R
Potentiometer
5 6
A_Out (0-10V) GND
8 9 Housing
A- Shielding
not in
Shielding
use
5
6
4
3
A_In
10V GND
Frequency converter
Version 1.0.6 - 2022-05-17