Optimum OPTiturn TH4610D Betriebsanleitung Seite 183

Interval Where?
Version 1.0.6 - 2022-5-17
What? How?
Oil change

Tighten the V-belt set as required.

If necessary, exchange the complete set of V-belts only.

Use the adjusting screws to tighten the V-belts.

Tighten the adjusting screws in a way that one single V-
belt may be squeezed approximately 5mm.
V-belt
Adjusting screws V-belt
check, re-
tighten
ATTENTION!
Only exchange the complete set of V-belts, never a
single one.
Translation of original instruction
Headstock filler hole
Headstock drain hole
Img.6-6: Headstock openings
Set of V-belts
Spindle brake
Img.6-7: Drive motor with spindle brake
TH4610 | TH4615 | TH4620 EN
183