HBM QuantumX CX27C Bedienungsanleitung Seite 9

Conversions and modifications
The module must not be modified from the design or safety engineering point
of view except with our express agreement. Any modification shall exclude all
liability on our part for any resultant damage.
In particular, any repair or soldering work on motherboards (exchange of
components) is prohibited. When exchanging complete modules, use only orig­
inal parts from HBM.
The module is delivered from the factory with a fixed hardware and software
configuration. Changes may only be made within the options documented in
the instructions.
Qualified personnel
Qualified personnel means persons entrusted with siting, mounting, starting up
and operating the product who possess the appropriate qualifications for their
function. This module may only be used by qualified personnel in accordance
with the specifications and in compliance with the safety requirements and reg­
ulations.
This includes persons who meet at least one of the three following require­
ments:
S Knowledge of the safety concepts of automation technology is essential and
as project personnel, they must be familiar with these concepts.
S As automation plant operating personnel, they have been instructed how to
handle the machine. They are familiar with the operation of the modules
and technologies described in this document.
S As commissioning engineers or service engineers, they have successfully
completed the training to repair the automation systems. They are also au­
thorized to operate, ground and label circuits and equipment in accordance
with safety engineering standards.
It is also essential to comply with the legal and safety requirements for the ap­
plication concerned during use. The same applies to the use of accessories.
CX27C
A02720_04_X00_00 HBM: public
Safety instructions
7