Industrial Ethernet (Sockets In (P1) / Out (P2)) - HBM QuantumX CX27C Bedienungsanleitung

Connections
8.4

Industrial Ethernet (sockets IN (P1) / OUT (P2))

Two RJ45 sockets are available on the front for connecting to the Industrial
Ethernet fieldbus system. The connection to the master is made via socket IN
(P1), with additional slaves connected via socket OUT (P2).
The interfaces support the following Ethernet variants (as per IEEE 802.3) -
100BASE‐TXTX at 100Mbit/s, full duplex, auto-negotiation and MDI/MDIX
auto-crossover.
52 CX27C
A02720_04_X00_00 HBM: public