Profinet Data Integration Workflow - HBM QuantumX CX27C Bedienungsanleitung

PROFINET IRT
7.4

PROFINET Data Integration Workflow

In case your DAQ system setup matches your needs you can start all chan­
nels.
Please configure all channels with the software MX Assistant and map the
signals to PROFINET in the following way.
Map all isochronous signals to PROFINET using the Outputs and sub tab
PROFINET outputs.
Use the PROFINET dialogue in the ribbon bar to generate a GSDML file. This
XML based file describes your system configuration (e.g. number of slots, sub­
slots, scaling, etc) and is the base configuring inputs and outputs of the
PROFINET controller setting up the project. The automatically generated file
can be imported to a PROFINET setup tool. You need to rebuild this specific
CX27C 41
A02720_04_X00_00 HBM: public