Configuration - HBM QuantumX CX27C Bedienungsanleitung

5

Configuration

5.1 Adjustment of the Industrial Ethernet mode
When connecting the QuantumX to an industrial fieldbus, the CX27 platform
uses an adjustable protocol stack with the following options: PROFINET IRT,
EtherCAT, and others.
Starting with firmware version 4.32, CX27C supports EtherCAT and
PROFINET Device IRT.
At delivery, the EtherCAT fieldbus mode is already preset. You can change
modes using the MX Assistant:
1. Connect your PC to the CX27C gateway via an Ethernet cable.
2. Supply voltage to the CX27C.
3. Start the MX Assistant, scan for modules and connect the MX Assistant
with CX27C.
4. You can pull up the fieldbus mode menu by right-clicking on the CX27C
(see Fig. 5.1). There you can choose between EtherCAT and PROFINET
(see Fig. 5.2).
5. Restart the gateway in order to activate the selected mode.
CX27C
A02720_04_X00_00 HBM: public
Configuration
15