Inhaltsverzeichnis
Werbung
b
1
3. Tighten:
4. Install:
NOTE:
• Before applying the adhesive, wipe off
• Install the grip (left) to the handlebar so that
5. Install:
NOTE:
• Before applying the adhesive, wipe off
• Install the grip to the tube guide so that the
64˚
c
3
5 - 42
HANDLEBAR
• Nut [handlebar holder (lower)] 1
34 Nm (3.4 m · kg, 24 ft · lb)
• Grip (left) 1
Apply the adhesive to the handlebar 2.
grease or oil on the handlebar surface a
with a lacquer thinner.
the line b between the two arrow marks
faces straight upward.
• Grip (right) 1
• Collar 2
Apply the adhesive on the tube guide 3.
grease or oil on the tube guide surface a
with a lacquer thinner.
grip match mark b and tube guide slot c
form the angle as shown.
CHAS
Werbung
Inhaltsverzeichnis
