Inhaltsverzeichnis
Werbung
ADJUSTING THE HEADLIGHT BEAMS
3 - 58
4. Remove:
• Headlight bulb
WARNING
Since the headlight bulb gets extremely
hot, keep flammable products and your
hands away from the bulb unit it has cooled
down.
5. Install:
• Headlight bulb
New
CAUTION:
Avoid touching the glass part of the head-
light bulb to keep it free form oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be
adversely affected. If the headlight bulb
gets soiled, thoroughly clean it with a cloth
moistened with alcohol or lacquer thinner.
6. Install:
• Headlight bulb holder
7. Install:
• Headlight bulb holder cover
8. Install:
• Headlight
7 Nm (0.7 m · kg, 5.1 ft · lb)
Refer to "SEAT, FUEL TANK AND SIDE
COVERS" section in the CHAPTER 4.
ADJUSTING THE HEADLIGHT BEAMS
1. Adjust:
• Headlight beam (vertically)
Adjusting steps:
• Turn the adjusting screw 1 in direction a
or b.
Direction a
Headlight beam is raised.
Direction b
Headlight beam is lowered.
INSP
ADJ
Werbung
Inhaltsverzeichnis
