Inhaltsverzeichnis
Werbung
OIL FILTER, WATER PUMP AND CRANKCASE COVER
(RIGHT)
Kick crank
1. Install:
• Kickstarter 1
• Plain washer
• Bolt (kickstarter)
NOTE:
Install so that there is a clearance a of 8 mm
(0.31 in) or more between the kickstarter and
frame and that the kickstarter does not contact
the crankcase cover when it is pulled.
2. Install:
• Oil tank breather hose 1
• Clamp 2
Water pump housing
1. Install:
• Dowel pin 1
• O-ring 2
2. Install:
• Water pump housing 1
• Bolt (water pump housing) 2
• Plain washer 3
• Coolant drain bolt 4
4 - 64
ENG
33 Nm (3.3 m · kg, 24 ft · lb)
2 Nm (0.2 m · kg, 1.4 ft · lb)
New
10 Nm (1.0 m · kg, 7.2 ft · lb)
New
10 Nm (1.0 m · kg, 7.2 ft · lb)
Werbung
Inhaltsverzeichnis
