Inhaltsverzeichnis
Werbung
Ð Fasten the AC magneto lead and neutral switch
lead onto the frame. Locate the clamp end fac-
ing toward the rear of the frame and cut off the
tie end.
Ñ Pass the neutral switch lead and AC magneto
lead on the inside of the wire harness.
Ò Fasten the AC magneto lead and neutral switch
lead onto the frame.
Ó Pass the wire harness through the cable guide.
Ô Locate the couplers in the frame recess.
Õ Pass the carburetor breather hoses, carburetor
overflow hose and catch tank breather hose so
that the hoses do not contact the rear shock
absorber.
Ö Secure the coupler by pushing it into the hole in
CABLE ROUTING DIAGRAM
the headlight unit.
2 - 25
SPEC
Werbung
Inhaltsverzeichnis
