Inhaltsverzeichnis
Werbung
KICK AXLE AND SHIFT SHAFT
2
4
1
3
2
1
EC4C5000
ASSEMBLY AND INSTALLATION
Segment
1. Install:
• Segment 1
• Bolt (segment)
NOTE:
Align the notch a on the segment with the pin
b on the shift cam.
CAUTION:
If the segment gets an impact, it may be
damaged. Take care not to give an impact
to the segment when tightening the bolt.
EC4B5111
Stopper lever
1. Install:
• Torsion spring 1
• Plain washer 2
• Stopper lever 3
• Bolt (stopper lever) 4
NOTE:
Align the stopper lever roller with the slot on
segment.
Shift guide and shift lever assembly
1. Install:
• Spring 1
• Pawl pin 2
• Pawl 3
To shift lever 4.
NOTE:
Apply the engine oil on the springs, pawl pins
and pawls.
2. Install:
• Shift lever assembly 1
To shift guide 2.
4 - 78
ENG
30 Nm (3.0 m · kg, 22 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)
Werbung
Inhaltsverzeichnis
