behnke AT6 Anleitung Seite 77

*87* 00 to 25 #
*92* 0 to 3 #
*01* #
*02* #
*03* #
*21* 0 to 3 #
*22* 0 to 3 #
*23* 0 to 3 #
*24* 0 to 3 #
Delay
Automatic disconnection
Emergency call protocol settings
ID code for P100
ID code for CPC
ID code for Q23
Type of the 1st phone number
Type of the 2nd phone number
Type of the 3rd phone number
Type of the 4th phone number
configurAtion StepS
Delay time until the emergency call is
activated after pressing the emergency
call button (default = 05 seconds).
Disconnects the connection if the emer-
gency call recipient has been silent for
longer than the set time.
0 = off (default, no automatic discon-
nection)
1 = 30 seconds
2 = 60 seconds
3 = 90 seconds
The ID code for P100 always consists of
8 digits
The ID code for CPC consists of 6 - 8
digits
The ID code for Q23 always consists of
12 digits
Following options are available for the
protocols for each phone number:
0 = P100
1 = LANGUAGE (no protocol, default)
2 = Q23
3 = CPC
Behnke AT6 manual
77