Schedule For Configuration By Phone - behnke AT6 Anleitung

11. SCHEDULE FOR CONFIGURATION BY PHONE

under the dialled phone number
When using a
local telephone,
the password
query is omitted
Schedule for configurAtion By phone
Voice communication mode
Only 1 dialling unit available
3 long beeps are emitted
You are in voice connection.
Configuration mode
In voice communication mode, press 00 to change modes.
It is called remotely
2 short beeps are emitted
Enter password: *0000#
2 short beeps: OK
Enter desired parameter and parameter to be changed
For example, 1 Change destination phone number: *11*0123456789#
2 short beeps: Change OK
Continue configuration?
Yes: enter other parameters
2 short beeps are emitted and the connection is disconnected.
Dial the phone number of the dialling
unit.
2 or more dialling units present under
dialled number
1 short beeps is emitted
Desired device number
Press (1-9)*
1 low tone: not OK
1 low tone: invalid input
No: end with *00*#
Behnke AT6 manual
Password
changed?
Enter parameters
again
75