Behnke AT6 manual
configurAtion
9.3. Configuration on site using a tele-
phone
You can perform a configuration using any land-
line telephone with tone dialling.
▸
Connect the handset to the RJ12 socket of the
AT6 dialling unit.
▸
Start the configuration mode "00".
▸
Enter the parameters and values using the
handset keypad.
9.4. Remote configuration using a telephone or cell phone
You can perform a remote configuration using
any landline telephone with tone dialling or any
cell phone.
▸
Dial the telephone number of the AT6.
▸
Start the configuration mode "00".
▸
Enter the password as follows: "*0000#".
▸
Enter the parameters and values using the
telephone keys.
72