Operation
The hob
The hob
features 10 power levels:
Power levels
L01
in watts
200
The hob
features 10 temperature levels:
Temperature
60
levels in °C
Safety cut-off
■
For safety reasons, the pan detection function automatically switches the
appliance into standby mode if you remove the pan from the hob
to place a pan on it.
■
If you remove the pan from the hob
seconds which will repeat for approx. 2 minutes. The display
error "
previously defined settings will be retained. Otherwise, the "
will disappear after 2 minutes and the appliance will switch to standby
mode.
NOTE
►
As long as the temperature of the hob
be shown on the display
Use
CAUTION! PROPERTY DAMAGE!
►
Do not use any pan (including contents) weighing more than 10 kg, as this
could damage the hob
►
Do not pull the mains plug out of the mains socket until the fans have
stopped working, as this could damage the appliance.
NOTE
►
The hob beeps every time you make an entry.
│
GB │ IE │ NI │ CY
■
10
L02
L03
L04
400
600
800 1000 1200 1400 1600 1800 2000
80
100
120
". If you place the pan back on the hob
.
.
L05
L06
L07
140
160
180
, you will hear a beep after a few
within 2 minutes, the
remains above 60°C, "
L08
L09
L10
200
220
240
or fail
shows the
" message
" will
SIKP 2000 E3