Operation; The Induction Fields; Safety Cut-Off - Silvercrest SDI 3500 D5 Bedienungsanleitung

Operation

The induction fields
The induction fields 1/3 have the following output levels:
Power levels
Left induction
field 1 (in watts)
Right induction
field 3 (in watts)
Both induction fields 1/3 have 19 temperature levels each:
Temperature levels
in °C
Although the two induction fields 1/3 are optically identical, the left induction
field 1 is more powerful than the right one 3. Therefore, bear in mind that you
can cook the same amount of food more quickly on the left induction field 1
and it can also burn onto the pan more quickly.
Safety cut-off
■ For safety reasons, the pan detection function automatically switches the
appliance into standby mode when you remove the pan from the induction
field 1/3 or do not place a pan on it at all.
If you remove the pan from the induction field 1/3, you will hear a beep
■
after a few seconds which will repeat for approx. 1 minute. The display t
shows the error "
within this time, the previously defined settings will be retained. Otherwise,
the "
to standby mode.
NOTE
As long as the temperature of the induction field 1/3 remains above
►
60°C, "
■ 10 │ GB │ IE
L01 L02 L03 L04
200 400 600 800 1000 1200 1400 1600 1800 2000
200 400 600 800 1000 1250 1500
60 70 80
160 170 180
". If you place the pan back on the induction field 1/3
" message will disappear after 1 minute and the appliance will switch
" will be shown on the display t.
L05 L06 L07
90 100 110 120
190 200 210 220
L08 L09 L10
— — —
130 140 150
230 240 -
SDI 3500 D5