Repairs; Safety Procedures; Hints To The Type Plate - probst HVZ-ECO Betriebsanleitung

Maintenance and care
8.5

Repairs

●
Only persons with the appropriate knowledge and ability are allowed to repair the device.
●
Before the device is used again, it has to be checked by an expert.
8.6

Safety procedures


It is the contractors responsibility to ensure that the device is checked by an expert in periods of max. 1
year and all recognized errors are removed ( see BGR 500).

The corresponding legal regulations and the regulations of the declaration of conformity have to be
observed!

We recommend, that after checking the device the badge „Safety checked" is put on the device.
(Order-No.: 2904.0056+inspection sticker with date).
●
You can receive these badges from us.
The check by an expert must be proved!
Device Year
8.1

Hints to the type plate

Type, serial-number and production year are very important for the identification of your device. If you need
information to spare-parts, warranty or other specific details please refer to this information.
The maximum carrying capacity/working load limit (WLL) is the maximum load which can be handled with the
device. Do not exceed this carrying capacity/working load limit (WLL).
If you use the device in combination with other lifting equipment (Crane, chain hoist, forklift truck, excavator)
consider the deadweight of the device.
51400034
Date
V3
Expert
40 / 41
Company
GB