Electrics; Repairs; Safety Procedures - probst STS-43-EH-23 Betriebsanleitung

Maintenance and care
5.1.2

Electrics

Service interval
After 25 operating hours
All 50 operating hours
5.2

Repairs

Only persons with the appropriate knowledge and ability are allowed to repair the device.
Before the device is used again, it has to be checked by an expert.
5.3

Safety procedures

•
It is the contractor's responsibility to ensure that the device is checked by an expert in periods of
max. 1 year and all recognized errors are removed (→ DGUV norm 100-500).
•
The corresponding legal regulations and the regulations of the declaration of conformity must be
observed!
•
The expert inspection can also be done by the manufacturer Probst GmbH.
Contact us at: service@probst-handling.de
•
We recommend affixing the inspection sticker "„Sachkundigenprüfung / Expert inspection" in a clearly
visible place (order no.: 2904.0056+Tüv sticker with year number) after the inspection has been done.
The check by an expert must be proved!
Device Year
51200081
Maintenance work
•
Control all electrical connections and/or retighten (the implementation is only
allowed by an expert)
•
Check all fuses (if existing)
•
Check the electric cabling for breaks and abrasion, if necessary replace it (only
qualified personal)
Date
15 / 16
Expert Company
GB