Product Specifications - Snapper E2512523BVE Bedienungsanleitung

EUROPEAN
REAR ENGINE RIDING MOWER
SERIES 23

Product Specifications

Deck Size (in)
Height of Cut (in)
Transmission Type
Ground Speed - Forward (mph)
Ground Speed - Reverse (mph)
Engine Power (hp / kw)
Engine Displacement (cu. in. / cc)
Fuel Tank Capacity (qt)
Common Service Parts
Cutter Blade (25" Standard Air-Lift)
Cutter Blade (28" Standard Air-Lift)
Cutter Blade (33" Standard Air-Lift)
Cutting Deck Belt (25 and 28")
Cutting Deck Belt (33")
Parts Manual
Engine Power Rating Information: The gross power rating for individual gas engine models is labeled in accordance with
SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating perform-
ance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060
RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other
things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products on which engines
are placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the
rated gross power when used in a given piece of power equipment (actual "on-site" or net power). This difference is due to a
variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump,
etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability.
Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this
Series engine.
Snapper Products
535 Macon Street
McDonough, GA 30253
36
E2512523BVE E2812523BVE
25
1.5 - 4.0
5-speed disc drive 5-speed disc drive
1.0 - 4.6
0 - 1.9
12.5 / 6.9 12.5 / 6.9
21 / 344
7
Part Number
7019518
7019515
7019523
7022252
7043844
7006129
1-800-935-2967
E2813523BVE
28 28
1.5 - 4.0 1.5 - 4.0
5-speed disc drive
1.0 - 4.6 1.0 - 4.6
0 - 1.9 0 - 1.9
13.5 / 7.0
21 / 344 21 / 344
7 7
E331523KVE
33
1.5 - 4.0
5-speed disc drive
1.0 - 4.6
0 - 1.9
15.0 / 8.5
26 / 426
7
www.snapper.com