Balluff BIS M-4A3-082-401-07-S4 Anleitung Seite 88

BIS M-4A_-082-401-07-...
Industrial RFID-System BIS M
5
Secondary Device Functions (continued)
Statistics Data Output: Status
Bit Meaning
position
0 Configured
1 Started min/
max/avg
2 Started moving
average
3 Buffer Overflow
Event
4 Timeout Event
5 Reserved
6 Reserved
7 Reserved
Tab. 5-7: Statistics Data Output – Status
5.1.5 System Commands
Command Value Device Action
0xA7 (167) Statistics Reset – Resets all output
parameters to 0 and all user
settings to the default values.
0xA8 (168) Statistics Start min/max/avg –
Starts the statistics of the minimum
value/maximum value/average
calculation.
0xA9 (169) Statistics Stop – Stops statistics
operation completely.
0xAC (172) Statistics Start Moving Average
– Starts the statistics of the moving
average calculation.
Tab. 5-8: Basic statistics – System Commands
For an overview of all System Commands, see section 3.4
on page 14.
5.1.6 Events
Event Code Event Type
0x8D07 (36103) Warning
0x8D0E (36110) Notification
Tab. 5-9: Basic statistics – Events
28 english
Description
1 – all inputs are configured
1 – min/max/avg running
1 – moving average
running
1 – buffer overflow
1 – the set time for the
minimum value/maximum
value/average calculation
has elapsed
–
–
–
Description
The calculation of the basic statistics was stopped
automatically to avoid a buffer overflow.
The time has elapsed. This event reports the timeout of
the minimum value/maximum value/average calculation.
It does not report a timeout for the calculation of the
moving average because the timer repeats and it does
not indicate the end of the calculation.
Device Status
0 – Device is
operating properly.
0 – Device is
operating properly.