Balluff BIS M-4A3-082-401-07-S4 Anleitung Seite 111

BIS M-4A_-082-401-07-...
Industrial RFID-System BIS M
6
System Functions (continued)
Mode
The function of the pin can be selected with Mode.
Value Name
0x00 (0) Inactive
0x01 (1) Digital Output
Tab. 6-11: Pin assignment – Mode
Signal Source
With Signal Source, the internal signal source for the pin
can be selected. Various signal sources are available that
can be output or read on a pin.
Value Name
Digital Output
0x0015 (21) SHORTCIRCUIT_PIN_4
0x0017 (23) UNDER_VOLTAGE
0x0018 (24) OVER_VOLTAGE
0x0021 (33) SIGNAL_QUALITY_BAD
0x0037 (55) INCLINATION_ALARM_STATUS
0x0048 (72) VIBRATION_ALARM_STATUS
0x0041 (65) LIFETIME_EXTREME
Tab. 6-12: Pin assignment – Signal Source
Logic
With Logic, the input/output can be configured as inverted
or normal.
Value Name
0x00 (0) Normal
0x01 (1) Inverted
Tab. 6-13: Pin assignment – Logic
Type
The output can be configured with Type.
Value Name
Digital
0x00 (0) PNP
0x01 (1) NPN
0x02 (2) Push-Pull
Tab. 6-14: Pin assignment – Type
6.4.3 System Commands
For an overview of all System Commands, see section 3.4
on page 14.
www.balluff.com
Description
The pin has no function and is high-impedance.
The pin works as a digital output.
Description
Switches with Overload / short-circuit pin 4 (see chapter 1.1.18
on page 32)
Switches with Undervoltage (see chapter 1.1.18 on page 32)
Switches with Overvoltage (see chapter 1.1.18 on page 32)
Switches with Signal Quality Bad (see chapter 1.1.14 on
page 23)
Switches with Inclination Alarm Status (see chapter 2.1.2 on
page 39)
Switches with Vibration Alarm Status (see chapter 2.1.8 on
page 42)
Switches with Life Time Extreme (see chapter 1.1.24 on
page 34)
Description
Non-inverted logic
Inverted logic
Description
PNP output
NPN output
Push-Pull output
english 51