Balluff BIS M-4A3-082-401-07-S4 Anleitung Seite 110

BIS M-4A_-082-401-07-...
Industrial RFID-System BIS M
6
System Functions (continued)
6.4 Pin Assignment
6.4.1 Description
Two different internal digital signals are available that can
be output at the pins of the device.
Pin 2 can be configured with the following functions:
Pin 2:
– Digital Output
6.4.2 ISDU
Name Index
Pin 2 Function 0x0093 (147)
Behavior IO-Link
Mode
Pin 2 Digital 0x0094 (148)
Configuration
1)
Signal Source
Logic
Type
The settings in the digital configuration are only used if the pin was configured as a digital output or digital input.
1)
Tab. 6-9: Pin assignment – ISDU
Behavior IO-Link
With Behavior IO-Link, the behavior of the pins during
active IO-Link communication can be determined. The pin
can either continue to perform its function or become
inactive.
Value Name
Pin 4
0x00 (0) IO-Link
Pin 2
0x00 (0) Inactive
0x01 (1) Normal Operation
Tab. 6-10: Pin assignment – Behavior IO-Link
50 english
Sub index Access
0 R/W
1 R/W
2 R/W
0 R/W
1 R/W
2 R/W
3 R/W
Description
This is the communication pin. It cannot execute any other
function during an active IO-Link connection.
The pin has no function and is high-impedance.
The pin retains its function.
Length Data Type
2 Byte
1 Byte ENUM
1 Byte ENUM
4 Byte
2 Byte ENUM
1 Byte ENUM
1 Byte ENUM
Data Default
Storage
Yes
1 (Normal
operation)
0 (inactive)
Yes
0x0021
(Signal
Quality Bad)
0 (normal
(not inverted))
0 (PNP)